WiFi, Wireless Tool-Kit -:+:- OverView,Security,Cracking,Hacking,Safety, (All You must have to know to secure your Wireless Network.)

Wifi AIO 2009 27 in 1 WiFi Tools & E-Books

Page 1:*

1. Comm View for WiFi v5.2484*
2. Pure NetWorks NetWork Magic 2*
3. Air Cr@ck*
4. AP Sniff*
5. Comm View*
6. Aerosol*
7. Easy WiFi Radar*
8. Boingo Wireless

Page 2:*

1. Get Wep Key Of Encrypted Wireless Connection*
2. WiFi Companion v2.10.4*
3. Net Stumbler*
4. WiFi H@ck Tools*
5. WiFi Internet Access Blocker*
6. iPig WiFi HotSpot VPN Security

Page 3:*

1. Hot Spotter v0.4*
2. Kismet* WDG*
3. AirShort v0.2.7e*
4. WiFi Hopper v1.2*
5. Wireless NetWork Ignition*
6. Wepwedgie - alpha*
7. Wep Cr@ckE-Books:*
8. O-Reilly Wireless H@cks*
9. System Cr@cking 2k*
10. FB! Teaches how to break WiFi*
11. Collection of H@cking Dictionary*
12. How to Cr@ck WEP

WiFi Troubleshooting: Low Signal & Weak Connectivity

Some Troubleshooting tips for you to solve Low Signal and Weak Connectivity Issues...

I don't know what Wireless Router and Wireless card You are Using but I describe all the Troubleshooting Tips in General for all.

• See around if a Microwave Oven or other Same frequency spectrum in Air like Card less Phone, Wireless Phone,
• Login to your router settings http://192.168.1.1/ and user/pass is admin/admin for most of routers. and Make Surveys or Site Scan or Scan.. to see if there are some other Stronger Wireless signals with same Channels.
• IF you find any other Wireless Networks with same channel like you have configured in you Router then change Your Routers Wireless Channel ...
• Best channels are 1,6,11 to use these all are non overlapping channels.
• One very important thing normally people don't know or take under notice. See there are different Wireless Channels Allocation in different parts of the world.Now you got an Access Point(Router) with 14 Wireless channels and your Laptops also with 14 Wireless Channels. in Country Settings.But your PC Wireless Adaptor is with 11 or 13 wireless channels.........There is a difficulty and lower connectivity.Make sure same country wide settings on Router and Wireless Adaptor.Hope this all would solve your problem...
• You can check response time under different Packet values by using following CMD command. Go to RUN in your Start Menu... Type "CMD" without " " and hit the Enter button...Now you can see a black screen, There you have to type this command "ping 192.168.1.1 -t -l 65550" without " " and type it right after C:/documents user setting/user/ Where in command:192.168.1.1 (IP Address of Your Access Point)-t (Continues Ping)-l (Packet Size from 1 to 65500)
• Now you can check the actual connectivity and quality of link for a wireless network connection using different packet size...

This is very helping for beginners to learn about Link Quality and what is Max packet size handling for that Wireless Link.

Interference & Co-existence

Fundamentals of radio interference, and methods for identifying and mitigating it.

• Author: Ryszard Struzak
• Language: English
• Formate: PDF
• Updated: 14 Aug 08
• DOWNLOAD

Client Side WiFi Access Point Installation For Fixed Terminle Wireless Connection.

As I was to finish the installation of all hardware on my end ( I was to give all the setup a name of Base Station).

Now this was a time to make my first client side installation.

1. I was to take TP-Link Access Point and cover it in a long life plastic box then Mount the box with a small poll or pipe of iron.
2. Now I was to plug Cat5e Ethernet cable's connector in Access Point's RJ45 Connector Place.
3. I was to install the Power Adaptor of Access point.
4. Now I was to stand the iron poll and access point is installed on it, Mean while I was to mak sure its small omini antenna is Vertical.
5. I was to Open and Access the Web Panel of TP-Link Access Point. Then I Configured it to make connectivity with my Wireless Base Station.

But this was a really bad happening. I was surprised, Theoretically this setup should make a very strong and good connectivity for a 2Km with a clear Line of Sight with a very good Signal Strength and Signal Quality. But Practically this was a big problem for me. Hardly i was able to get a very poor signal of my Base Station or WISP Setup. Not even continouse signal only a blink of signal and then no signal.


I would like to share Problems at first. Latter You will find out troubleshooting or DIY works information.