1- All than first I was to install a 30 feet tower on my building's roof witch was about 40 feet high.
2- Then I was to mount D-Link Omini Antenna on top of that tower.
(Never Forget to Use Safty Belt When You Going to Climb a High Tower)
3- After that I was to tighten the Surge Protector with Antenna's
4- At next I was to fix RF cable with other end of the Surge Protector
5- Now this time to Mounte the Outdoor Unit of RF Amplifire
6- Now witch cable we was to fix with Surge Protector other end of that RF cable we have to connect with Out Door Unit's Connector wich is labled with text " To Antenna"
7- Come to the other end where we got the Access Point and Indoor Unit of RF Amplifire, Here we have to Remove the Patched Antenna of Linksys Access Point.
8- Now we will use RF cable (witch was bundeld with Amplifire) to connect Access Point with Indoor Unit of Amplifire.
9- This is time to work on ethernet or LAN from the ADSL modem. Install the ADSL Modem. Run a LAN Cable to Access Point WAN port.
10- Install all the power adopters of Devices properly so there is no chance of lose connection or sparking in electricity sockets.
Becarefull >>> ( NEVER FORGET TO USE SURGE PROTECTOR >>>During thunder storms our 2.4GHz Devices can catch some of very high frequency radiations witch can lead to a disorder in functionality of Devices or those Devices could be dead at all <<< )
Now my Base Station is ready, time for client side installation. Let's Read about that in my Next POST.
Fist I have to have a Connectivity, latter i will install Client or User Management Linux Machine or Server between ADSL Modem & Access Point. ( You'll Read About this in Coming Posts. )